WATCHDIVES

Watchdives Upgraded Short OTF Adjustable Clasp

$39.00 $29.95 Save 23% Sold out
🇺🇸 All U.S. Orders Include Import Duties | Shipping Guide →
Endlinks: For Watchdives Push-Pin Endlink Bracelet(with 2 endlinks)

For 3-link Bracelet:  OTF Clasp can fit Watchdives Oyster/3 Links Bracelet WD7922，WD0006，WD1960S，WD1969 Pro，WD5512，WD5512B，WD5513 V2，WD5513 V3(B/P/M/Q Version),WD1965,WD0562, WD0019，WD6610，WD1680Q，WD6263，WD6105, WD1016 

For WD Speedy Split Pin Bracelet: WD1860/WD1861/WD1862/WD1863 push pin structure bracelet.

For WD Speedy Screw Pin Bracelet(New)：WD1863 screw-pin structure bracelet

For WD7922 /WD1969Pro/WD1993 models with push-pin bracelet, please select:👉 Watchdives Push-Pin Endlink Bracelet (with 2 endlinks) or without endlink clasp.

Compatibility Note

For the following models: WD7922 / WD1969PRO / WD0003 Series / WD16570 / WD16570B / WD1993 / WD0014, the last bracelet link on one side is 8mm wide.

If this 8mm end link is connected directly to the OTF adjustable clasp, there may be a small visible gap. For the best fit, we recommend removing the last bracelet link and attaching the second-to-last bracelet link to the clasp instead.

If you’re not sure about compatibility, please contact our customer service for confirmation.

Specification
Model: WDB002
Without or With 2pcs extension links, side polished.
Material: 316L Solid Stainless Steel
Length: 35mm
Clasp: New On-The-Fly Adjustable Clasp, With Logo

Important fitment note (please read):
The upgraded clasp uses 9.0 mm end-link notches, while some earlier bracelets measure 8.8–8.9 mm at the connecting point.
As a result, after installation, a very small gap (approx. 0.1–0.2 mm) may be visible, and if the bracelet is shaken by hand, you may notice slight lateral movement.

This is within acceptable tolerance, does not affect security or daily wear, and is only noticeable when intentionally checking for it. We prefer to state this clearly in advance so expectations are fully aligned.

WDB002 connector option check

Start with the bracelet you have now, including any replacement bracelet. Record the connection details below, then compare the listed options.

Check on your bracelet Your result
Fastener at the clasp connection Screw pin / split push pin / other / unknown
Projecting center-link width _____ mm / unknown
Inside width of the receiving notch _____ mm / unknown

Record actual measurements only where you can check them confidently. These photos are not to scale. Do not measure the image or infer the fastener type from a slot-like mark alone.

For a WD Speedy bracelet with confirmed pin construction

Official WDB002 WD Speedy screw-pin option, with a close-up of its connector
Confirmed screw-pin bracelet
View the WD Speedy Screw Pin option. Listed for the WD1863 screw-pin bracelet.
Official WDB002 WD Speedy split-pin option, with a close-up of its connector
Confirmed split-pin bracelet
View the WD Speedy Split Pin option. Listed for WD1860, WD1861, WD1862 and WD1863 push-pin bracelets.

The WD1863 appears in both groups because the listing distinguishes bracelet construction. A model name or matching width alone does not confirm fit. Compare the complete connection and review the fitment notes above.

Different connection or unsure?

If any detail is unknown, ask us to confirm your connection before ordering. Include the watch model, whether its bracelet has been replaced, and clear photographs of both clasp connections. Check the selected option's current availability on this page.

Endlinks: For Watchdives Push-Pin Endlink Bracelet(with 2 endlinks)