Skip to content
WATCHDIVESWATCHDIVES
PT5000 vs NH35: Beat Rate, Date and Real Watch Examples

PT5000 vs NH35: Beat Rate, Date and Real Watch Examples

The PT5000 and NH35 both wind automatically and can also be wound by hand. The most visible difference is the cadence of the seconds hand. The PT5000 runs at 28,800 vibrations per hour, or eight beats per second. The NH35 runs at 21,600, or six beats per second. For a purchase, compare the features and fit of the finished watch as well as the movement.

PT5000 vs NH35 at a glance

Specification PT5000 NH35
Winding Automatic and manual Automatic and manual
Balance rate 28,800 vph / 4 Hz 21,600 vph / 3 Hz
Seconds cadence Eight beats per second Six beats per second
Jewels 25 in the WD5513P listing 24 in the TMI specification
Date Verify the watch configuration TMI specifies a date mechanism

Vibrations per hour count half-oscillations of the balance. Dividing by 3,600 gives eight and six beats per second respectively. A full balance cycle takes two beats, which is why these rates are described as 4 Hz and 3 Hz. A higher frequency gives the seconds hand smaller steps. The daily rate still depends on regulation, position, state of wind and the individual watch.

Compare two complete dive watches

The Watchdives WD5513P PT5000 is the Black / Sword Hands / BGW9 configuration at a listed US$179. The 40.7 mm figure describes the bezel. The watch spans 48 mm lug to lug and measures 12.4 mm including the domed sapphire crystal. Its aluminum bezel insert and stainless-steel bracelet are part of the complete design.

Watchdives WD5513P PT5000 with black dial and sword hands
WD5513P Black / Sword Hands / BGW9.

The Addiesdive AD2064 NH35 is the black configuration at a listed US$139. It has a 41 mm case without the crown, a 48 mm lug span, sapphire crystal and a listed case thickness of 13 mm. The maker’s listing gives that thickness without explicitly stating the measurement basis, so compare the two height figures with care.

Black Addiesdive AD2064 NH35 automatic dive watch
AD2064 in the black configuration.

Does a higher beat rate mean the watch is more accurate?

Frequency describes how often the balance beats. Accuracy describes the difference between the time shown and a reference. If accuracy matters to you, ask for the regulation specification for that watch. Compare running results over several days under your normal wearing conditions. A movement's beat rate or jewel count alone cannot establish accuracy, durability or servicing intervals.

Check the date and exact movement before you order

The NH35 is a three-hand movement with a date mechanism in TMI’s specification. The date you see depends on the dial and the watch assembly. Watchdives lists the WD1968 date versions with PT5000 and its no-date versions with PT5004. Check the precise configuration. Two product listings can use the same series name while specifying different movement or calendar options.

The movements also should not be treated as drop-in substitutes. The case holder, dial feet, hands, crown stem and hand clearances need to fit the intended caliber. For an existing watch, give the exact reference to the maker or a qualified watchmaker.

For more detail, see the PT5000 movement guide, the NH35 movement guide or the NH35 watch collection. NH35 caliber data are from the TMI product line. PT5000 frequency and jewel count are from the selected Watchdives listing. Geckota’s movement specifications also document PT5000 hand-winding in its watches. Prices are listed U.S. prices checked November 19, 2026.

Leave a comment

Your email address will not be published..

Cart 0

Your cart is currently empty.

Start Shopping