Skip to content
WATCHDIVESWATCHDIVES
20mm Watch Straps and Bands: How to Choose a Replacement

20mm Watch Straps and Bands: How to Choose a Replacement

A 20 mm watch strap fits a nominal 20 mm lug opening. To choose one you can use, also check the attachment shape, spring-bar clearance and the usable length on your wrist. The Watchdives options below cover four different ways to attach and wear a 20 mm band.

Compare 20 mm watch bands by material and attachment

20 mm band Construction Fit detail from listing Listed price
Quick-release fluororubber #264 Β· Blue / Silver Two-piece fluororubber, quick-release spring bars 125 + 75 mm pieces. 3–4 mm thickness. Straight ends. US$17
007 woven nylon Β· Black Woven one-piece pass-through, steel buckle 270 mm listed excluding buckle. Check the clearance behind the case. US$3.99
Perforated cowhide Β· Brown Two-piece perforated leather, steel pin buckle 124 + 80 mm listed. Check which wrist hole you will use. US$18.99
316L three-link bracelet Β· Silver Straight-end 316L three-link bracelet, folding clasp The shared listing gives 180–195 mm excluding buckle. Check the sizing range for this linked option. US$28

Prices are listed in USD for the linked colours and widths, checked November 19, 2026. If you need a different width, start with our watch strap sizing guide.

Quick-release rubber if you change straps often

The 20 mm fluororubber example uses spring bars with tabs at the watch end. The tabs let you retract the bars by hand once the ends are correctly aligned. Check that there is room between the bar and the case for the strap to rotate. A quick-release spring bar changes how the strap attaches. A quick-adjust clasp changes how tightly it sits on your wrist.

Black and blue Watchdives #264 fluororubber straps with metal buckles
The linked #264 option is blue with a silver buckle in 20 mm.

Pass-through nylon if you prefer a one-piece strap

The woven 007 strap runs behind the case. Check the gap under each bar first, and allow for the material underneath the watch when assessing the height on your wrist. The metal hardware and the spare tail also take up room around the wrist. See the pass-through strap fitting guide.

Leather or steel if you want a different finish

A two-piece leather strap keeps the area beneath the case clear. When comparing lengths, measure the buckle side and hole side separately on a strap you already wear. A straight-end steel bracelet leaves a different outline by the case than a fitted end-link bracelet. Look at the first link from the side and check how quickly it turns downward. If you prefer smaller, rounded steel links, compare our beads-of-rice bracelet options.

Silver Watchdives straight-end three-link steel watch bracelet
Silver three-link bracelet. The ends are straight.

Compare 20 mm stainless steel watch bracelets

If your watch takes a straight-end 20 mm bracelet, choose the link pattern or mesh after checking the attachment. The three link bracelets below share the same 316L listing. Select the 20 mm width and the intended pattern together. The Premier short steel mesh uses a separate construction and lists 88 mm and 98 mm sections before the clasp.

20 mm option Construction Listed price
20 mm 316L three-link 316L straight end with three-link layout US$28
20 mm 316L beads of rice 316L straight end with rounded beads-of-rice links US$28
20 mm 316L seven-link 316L straight end with seven-link layout US$28
Premier 20 mm short 316L mesh 316L straight-end mesh, short length US$65

For fitted ends or a model-specific upgrade, compare watch bracelet types and attachment styles before ordering.

Compare 20 mm titanium watch bands by fit

There are two distinct 20 mm titanium connections here. A flat-end Milanese mesh bracelet uses a straight attachment. The WD007Q three-link bracelet has shaped end links that fit a specific case and production batch. Before ordering, check the case clearance and spring-bar fit as well as the nominal lug width.

Selection Watch-end attachment Length before clasp Nov. 20, 2026 check
Premier Grade 2 titanium mesh Β· Long 20 mm flat end 105 + 105 mm Available at $135
Premier Grade 2 titanium mesh Β· Short 20 mm flat end 88 + 98 mm Unavailable
Premier 316L steel mesh Β· Short 20 mm flat end 88 + 98 mm Available at $65
WD007Q titanium three-link bracelet Fitted WD007Q VH31 end links Check sizing and production batch. The bracelet tapers from 20 to 16 mm at the clasp. Unavailable. Confirm the watch’s production batch with Watchdives.

Both Premier mesh lengths list seven adjustment holes. The lengths describe separate band sections, so compare them with a bracelet you already wear and check the clasp location. They do not give the fitted wrist circumference. The 316L steel Long version also lists 105 + 105 mm before the clasp if you want to compare materials at the same length.

Premier Milanese mesh band with a straight attachment and folding clasp
Premier product image showing the mesh and straight attachment. Select material and length separately.

Buying a complete watch? Compare the WD007Q V2 quartz with its three-link titanium bracelet and the WD007 V4 automatic on titanium. Both have a matching bracelet in the linked configuration. For a replacement, the WD007Q parts listing requires a production-batch check, and it excludes the automatic WD007. Check fit before choosing any fitted replacement.

Will a 20 mm strap fit a 40 mm watch?

Check the watch's specified lug opening. Case diameter measures across the case, while lug width measures the gap where the strap connects. Integrated or curved-end bracelets can also require a particular shape or attachment even when both are marked 20 mm. Confirm the buckle-end width separately if you intend to reuse an existing clasp.

Browse the Watchdives watch bands collection for more colours and materials.

Leave a comment

Your email address will not be published..

Cart 0

Your cart is currently empty.

Start Shopping