Choose a watch clasp in two steps. First decide how you want the strap or bracelet to open. Then decide how you want to adjust its fit. A pin buckle changes length hole by hole. A folding clasp can use fixed holes or include a separate on-the-fly adjustment mechanism.
Four watch clasp and buckle types compared
| Watch | Closure | How fit is adjusted | Listed price |
|---|---|---|---|
| Watchdives Tropical FKM strap | Pin buckle | Select a different strap hole | US$14.99 |
| Watchdives WDS003 CTS deployant | Folding leaf-spring deployant | Trim the strap according to its sizing instructions | US$25 |
| Watchdives upgraded five-hole clasp | Folding bracelet clasp | Move the attachment between five preset holes | US$18.99 |
| Watchdives WDB002 short OTF clasp | Folding on-the-fly clasp | Adjust with the built-in mechanism after initial bracelet sizing | US$29.95 |
Pin buckle for a simple strap
The pin passes through a hole in the strap. Choose a different hole when you want a looser or tighter fit. The Tropical FKM example is a two-piece 20 mm watch strap with an 18 mm buckle. Those widths refer to different ends. Check both if you plan to move a buckle to another strap.
Deployant clasp for a folding strap closure
A hinged deployant opens to give you room to slide the watch over your hand. This WDS003 example has a leaf-spring clasp and a cut-to-size FKM strap. Confirm the fit with the watch attached before trimming. The length you cut off cannot be put back. A butterfly clasp is a double-fold layout that opens in two directions. Check the clasp description and photos to identify the hinge and adjustment on the exact strap.
For a closer look at the two folding arms and the role of half links, see how a butterfly clasp opens and how the bracelet is sized.
To buy a complete strap and clasp, compare leather and rubber deployant clasp straps by lug width, taper and fit.
Five-hole bracelet clasp for small preset changes
On a five-hole clasp, the bracelet's attachment point can be moved to another hole to refine the fit. Initial bracelet sizing is a separate job. A folding safety catch, where fitted, helps secure the closure. It does not tell you how the bracelet is sized.
On-the-fly clasp for changes during the day
An on-the-fly clasp, often called OTF, lets you change the fit in small steps without moving the bracelet to a different hole. Size the bracelet first. On replacement clasps, match the connector shape, attachment dimensions and fastener where the bracelet joins the clasp. The WDB002 screw-pin example below is for a confirmed WD Speedy screw-pin connection. A similar watch name, a matching lug width or a screw on a different link does not establish compatibility.
Check what attaches at each end
For a strap, check lug width and buckle width. For a bracelet, check the actual clasp connection and sizing instructions. If you are shopping for a complete watch, see our guide to watches with included OTF clasps. The strap sizing guide shows where to measure before ordering a replacement.
