Skip to content
WATCHDIVESWATCHDIVES
How to Wind an Automatic Watch and Set the Date

How to Wind an Automatic Watch and Set the Date

If an automatic watch has run down, check its calibre before you wind it. Many automatics can be started with the crown, but the winding position, direction and number of turns depend on the movement. Once it is running, set the hands and calendar using the instructions for that calibre.

How to wind a stopped automatic watch

  1. Identify the movement and the crown type. Look up the exact calibre in the watch specifications. If the crown screws down, release the threads first. The crown guide shows how those two crown types differ.
  2. Use the winding position. On the two examples below, the crown winds the movement in its normal position. On a screw-down crown, that means the crown is free of the threads and has not clicked out into a setting position.
  3. Wind according to the manual. Turn gently in the stated direction. A watch beginning to run and a movement reaching full wind are two different milestones.
  4. Set the time, then return the crown. Follow the setting positions in the manual. Seat or screw down the crown as the watch requires, without forcing it.

How many turns? Two movement manuals compared

Watch Calibre Winding instructions Avoid quick-setting the date Listed price
Watchdives WD0014 NH34 55 or more clockwise turns for full wind 9 p.m. to 4 a.m. US$219
WDC0001 Premier Forest Black Miyota 9015 15–20 clockwise turns to start the seconds hand Around 8:30 p.m. to 2 a.m. US$459

The TMI NH34 technical guide gives a minimum of 55 clockwise turns for full wind. The Miyota 9015 instructions give 15–20 clockwise turns to get the seconds hand moving normally. The two figures describe different outcomes. Use the power reserve guide if you want to measure how long your watch actually runs after winding.

Watchdives WD0014 NH34 GMT with black dial, red and black bezel and a steel bracelet
Watchdives WD0014 Β· Black- BGW9 Lume / Black/Red
WDC0001 Premier with a dark patterned mother-of-pearl dial on steel
WDC0001 Premier Forest Black Β· Forest Black MOP

What time should you avoid when setting the date?

Check the time shown on the watch, including whether its hands indicate morning or evening. TMI warns against quick-setting the NH34 date between 9 p.m. and 4 a.m. Miyota gives approximately 8:30 p.m. to 2 a.m. as a period when adjustment can disrupt the 9015's next daily change. For these two cited calibres, moving the hands to a known daytime position such as noon puts the display outside both windows. Check the manual for any other calibre before using its quick-set function.

What if it still does not run?

Confirm the crown has been returned from the time-setting position. If the crown binds or the watch still stops after correct winding, stop forcing the crown and consult the stopped automatic watch guide. Record what you did and how long it ran so a watchmaker can reproduce the symptom.

Leave a comment

Your email address will not be published..

Cart 0

Your cart is currently empty.

Start Shopping