Skip to content
WATCHDIVESWATCHDIVES
How to Read a GMT Watch: Fixed vs Rotating 24-Hour Bezels

How to Read a GMT Watch: Fixed vs Rotating 24-Hour Bezels

Read the ordinary hour and minute hands for local time. Read the GMT hand against the 24-hour scale for the other time zone, then use the same minute hand for the minutes in a whole-hour-offset example. A GMT hand pointing between 16 and 17 with the minute hand at :30 indicates 16:30.

A fixed GMT bezel: Read the second time zone directly

Start with local time at 09:30 and the GMT hand placed halfway between 16 and 17. The GMT reference time is 16:30. On the Watchdives WD16570B V2, the 24-hour bezel stays fixed, so changing which time zone the GMT hand tracks means adjusting the watch according to its movement instructions. The orange hand on the Enamel White version is the hand to read against the outer numbers.

White Watchdives WD16570B V2 with orange GMT hand and fixed steel 24-hour bezel
WD16570B V2, Enamel White with orange GMT hand.

A rotating GMT bezel: Move the scale to read another time zone

The Watchdives WD16760 V2 has a bidirectional 24-click bezel. In the example below, the GMT hand starts on UTC and you want to check a location two hours ahead of UTC. Start with 24 at 12 o'clock, the neutral bezel position on this style of GMT watch.

  1. Read your reference first. The local hands show 09:30 and the GMT hand shows 16:30 on the neutral scale.
  2. Bring the higher number to the hand. Put the bezel's 18 where 16 was. On this clockwise-numbered bezel, that means turning the ring two clicks counterclockwise when viewed from the front.
  3. Read the shifted scale. The GMT hand still occupies the same position relative to the dial. It now reads 18:30 on the outer ring. Local time remains 09:30.
  4. Restore the reference. Move the bezel back to neutral to read UTC directly again.
Bezel position Local hands GMT hand reading Scale reference
Neutral bezel 09:30 16:30 UTC UTC Β· 24 at 12 o’clock
Two clicks counterclockwise 09:30 18:30 UTC+2 Β· 18 where 16 was

If the neutral reading is 23:30, the same two-hour shift gives 01:30 the following day in the target time zone. The bezel leaves the watch's date mechanism untouched. Work out the target date separately, especially when you cross midnight.

Watchdives WD16760 V2 with blue and red rotating 24-hour bezel
WD16760 V2, Blue/Red, 3-link bracelet.

When does a rotating bezel give you a third time zone?

When the rotating ring is the only 24-hour scale, you can switch between the original reference and the shifted time by moving the ring. A separate fixed 24-hour scale can preserve the original reference while the shifted bezel shows another time. In either case, the regular hands continue to show local time.

Pick the right scale and setting instructions

Use the 24-hour scale for a GMT hand. A 60-minute dive bezel serves a separate purpose: tracking elapsed minutes. The one-hour-per-click example also assumes a whole-hour offset. For a zone with a 30- or 45-minute offset, calculate the minute difference separately if the bezel adjusts only in whole-hour steps. Check the target location's current offset when daylight saving time changes.

For crown positions and hand-setting steps, use the instructions for your exact movement. See our NH34 movement and setting guide for the WD16760 V2, and browse GMT watches if you're deciding between a fixed and a rotating bezel. Seiko's 24-hour bezel instructions explain the same scale-shift principle for its own 6R64 models.

Leave a comment

Your email address will not be published..

Cart 0

Your cart is currently empty.

Start Shopping