Skip to content
WATCHDIVESWATCHDIVES
42mm Watches: How to Choose Between 40mm and 42mm

42mm Watches: How to Choose Between 40mm and 42mm

A 42 mm watch is 2 mm wider than a 40 mm watch when both numbers describe case diameter. To see how much of the watch sits on your wrist, also compare lug-to-lug length, total height and the way the strap leaves the case. Two of the watches below have the same 42 mm case diameter and different lug spans.

40 mm vs 42 mm watches compared

Watch Case or bezel Lug-to-lug Thickness Listed price
EXD-40 SL3001 Β· Blue No Date 40 mm titanium case 48 mm 11.6 mm listed US$189
WD007 V4 Β· Blue / Nylon 42 mm titanium case 48.95 mm 12.2 mm including crystal US$179
WD1864 CAMBRIC Β· Blue Linen 42 mm steel case Β· 40 mm bezel 47 mm 13 mm including crystal US$179
WD1860 Β· Black / Steel 40 mm bezel Β· steel case diameter unstated 46.9 mm 13.95 mm including crystal US$105

Dimensions are the manufacturer's published measurements for these references. The chronographs show why the measurement label matters. WD1864 is a 42 mm case with a 40 mm bezel. The WD1860 listing gives a 40 mm bezel and does not state a separate case diameter. Listed USD prices are for the linked configurations, checked November 19, 2026.

A 42 mm dive watch and a 40 mm dive watch

The WD007 V4 has a 42 mm titanium case, a 48.95 mm lug span and a domed sapphire crystal. The EXD-40 automatic has a 40 mm titanium case, a 48 mm lug span and flat sapphire. Their widths differ by 2 mm, while the published lug spans are less than 1 mm apart. The WD007 V4 uses a unidirectional timing bezel. The EXD-40 uses a bidirectional bezel. Compare the exact scale, strap and case profile along with the size.

Blue Watchdives WD007 V4 titanium dive watch on a nylon strap
WD007 V4. 42 mm case with a 48.95 mm lug span.

How a 42 mm chronograph can have a shorter lug span

The WD1864 CAMBRIC measures 47 mm lug-to-lug, shorter in that dimension than both of the divers above. It also measures 13 mm including its raised sapphire crystal, and this version comes on a steel bracelet. Compare the clearance under a cuff and the turn of the first bracelet links. Consult our chronograph guide to see what the dial's counters do.

Watchdives WD1864 CAMBRIC blue linen chronograph on a steel bracelet
WD1864 CAMBRIC. 42 mm case with a 47 mm lug span.

How to check a 42 mm watch on your wrist

  1. Measure across the top of your wrist where the watch sits. Keep the ruler straight.
  2. Compare the published lug-to-lug length with a watch you already wear comfortably.
  3. Look at a side view of the band and case. On a bracelet, note where the first links start to bend, and compare the complete height including the crystal where specified.

For a wider range, use our watch case size chart to compare cases from 36.5 to 42 mm.

For smaller case sizes, use our 38 mm vs 40 mm guide. For more rotating-bezel options, browse the dive watch collection.

Leave a comment

Your email address will not be published..

Cart 0

Your cart is currently empty.

Start Shopping