Skip to content
WATCHDIVESWATCHDIVES
19mm Watch Straps: Rdunae TPU or Woven Fabric?

19mm Watch Straps: Rdunae TPU or Woven Fabric?

Looking for an actual 19mm watch strap? Two current Rdunae options at Watchdives offer that width: a two-piece TPU strap and a one-piece woven fabric strap. Choose the construction you prefer, then check the connection and usable length for your watch.

This is a comparison of the listed specifications and product photographs. Neither strap has been fit-tested here on every watch with 19mm lugs.

1. Rdunae 19mm TPU strap: two-piece construction

The Rdunae TPU strap has straight ends, a raised rectangular pattern and a conventional pin buckle. The listing specifies soft TPU, a stainless-steel buckle and a 16mm buckle width.

Choose the exact 19mm option in Black or Orange. This product is listed as TPU; buyers specifically seeking FKM should check the material rather than treating every rubber-style strap as interchangeable.

Black Rdunae two-piece TPU strap with a rectangular surface pattern and silver-colored pin buckle.
The product photo assigned to the Black / 19mm option shows the two-piece layout and pin buckle.

Length check: the current length entry is unclear. Confirm the two strap-piece lengths and usable hole positions before ordering, particularly if your wrist needs a short or extra-long strap.

2. Rdunae 19mm woven fabric strap: one-piece construction

The fabric option uses a one-piece layout with adjustment holes and a pin buckle, as shown in the product photographs. Its listing specifies high-density woven canvas, a stainless-steel buckle and a length of 28cm excluding the buckle.

The exact 19mm choices are Black and Middle brown. The latter option's listing photograph shows a dark strap with a brown-toned central stripe.

Rdunae woven fabric strap with a brown-toned central stripe, adjustment holes and a silver-colored pin buckle.
The product photo assigned to the Middle brown / 19mm option shows its woven finish and one-piece layout.

The 28cm figure is total strap length, not a promised wrist circumference. Check the required routing, clearance and usable adjustment range for your watch.

Three checks before choosing

  • Measure the watch-end opening. Confirm the actual inner lug width using your watch's specifications or a metric measurement. Case diameter and buckle width are separate dimensions.
  • Check the whole connection. Confirm the spring-bar or other attachment design, required hardware and available clearance. A matching 19mm label alone does not confirm fit, quick-release compatibility or compatibility with fitted end links.
  • Check length separately. Compare with a strap that fits your watch and wrist. Where measurements or included hardware are unclear, ask before ordering.

Choose the TPU option for its two-piece patterned design, or the fabric option for its one-piece woven design. For other widths and materials, browse watch straps and bands.

All four linked 19mm variants were available when checked on October 8, 2026. Check the selected option for current availability.

Leave a comment

Your email address will not be published..

Cart 0

Your cart is currently empty.

Start Shopping